Researchers have found that bricks made from fly ash — fine ash particles captured as waste by coal-fired power plants — may be even safer than predicted. Instead of leaching minute amounts of mercury as some researchers had predicted, the bricks apparently do the reverse, pulling minute amounts of the toxic metal out of ambient air.
Each year, roughly 25 million tons of fly ash from coal-fired power plants are recycled, generally as additives in building materials such as concrete, but 45 million tons go to waste. Fly ash bricks both find a use for some of that waste and counter the environmental impact from the manufacture of standard bricks.
“Manufacturing clay brick requires kilns fired to high temperatures,” said Henry Liu, a longtime National Science Foundation (NSF) awardee and the president of Freight Pipeline Company (FPC), which developed the bricks. “That wastes energy, pollutes air and generates greenhouse gases that contribute to global warming. In contrast, fly ash bricks are manufactured at room temperature. They conserve energy, cost less to manufacture, and don’t contribute to air pollution or global warming.”
Once colored and shaped, the FPC bricks are similar to their clay counterparts, both in appearance and in meeting or exceeding construction-material standards.
Supported by NSF’s Small Business Innovation Research (SBIR) program, Liu has been working since 2004 to develop the bricks. The first phase of support enabled him to make fly ash bricks more durable by engineering them to resist freezing and thawing due to weather. Liu is now working from a second-phase SBIR award to test the brick material’s safety and prepare it for market.
“Green manufacturing is a focus for the nation,” said Tom Allnutt of NSF’s SBIR program, who oversaw Liu’s award. “Liu’s innovative use of fly ash to manufacture high quality building materials will potentially decrease some of the negative environmental impact of coal-fired power generation while meeting increasing demands for greener building materials.”
While researchers need to study the bricks further to determine how the mercury adsorption occurs and how tightly the metal is trapped, the new findings suggest the bricks will not have a negative impact on indoor air quality.
On average, air contains low amounts of mercury that can range from less than 1 nanogram per cubic meter (ng/m3) to tens of ng/m3 — a small fraction of the Environmental Protection Agency limit for continuous exposure.
Inside a confined experimental chamber, the bricks did not raise the mercury levels in the surrounding air (originally more than one nanogram), and instead appeared to lower the concentration down to roughly half a nanogram.
Engineers from FPC of Columbia, Mo., developed the bricks with NSF support and reported their findings on mercury leaching at the May 7-10, 2007, World of Coal Ash Conference in Cincinnati, Ohio.
[tags]brick, building supplies[/tags]