Gnomie Herb (Cuz) writes:

Hey Chris, I just stumbled upon some of your YouTube videos and wanted to share with you the problem of keeping dust bunnies, smoke, mold spores, etc. out of your computer CPU.

My old CPU had a buildup of smoke and dust in the heatsinks, which actually makes a substance much like a tar resin. So I ordered a new HP system and wanted to keep it as clean as possible.

It took about two weeks to build a cabinet, which has kept the CPU looking like new. The CPU is housed inside a box I built, which uses a piano-type hinge for the door, military type 1/4 turn latches, weather stripping for the box/door seal, a 1/8″ Lexan front door cover (so you can actually see the front of the CPU), a Radio Shack 65 CFM fan in a plenum chamber, and an air filter box, which is connected using PVC pipe. I use a 20″ x 20″ 3M Filtrete Filter, which removes dust, smoke, mold spores, and the other little nasties which can’t been seen in unfiltered air.

The system has now been in operation for about two months and the filter is a brown color, as compared to the snow-white color of a new filter. The 65 CFM fan pulls fresh filtered air from the filter box (which I built over the CPU box and is a permanent fixture, which I’ve incorporated into the shelves) into a plenum box, through the fan, and floods the complete CPU with fresh filtered air. So the filtered air may enter into the CPU from top, bottom, front, and sides, is drawn into the CPU, and exits normally through the rear of the CPU.

When I built the box, I used fiberglass resin painted inside and out, so the wood fibers and dust would actually be sealed and wouldn’t enter into the CPU after an extended period of use. Now, while looking through the Lexan front cover (Lexan, by the way, is a bulletproof type of plexiglas), the CPU is as clean as when I originally took it out of the plastic wrap, from the shipping box, with absolutely no dust visible, and there is no dust visible from the rear of the unit. This signifies there aren’t any dust bunnies inside the unit. Wish I had four grand to invest for patent and marketing for this, as I could probably retire! I believe if they were mass produced, they could actually sell for about 100 to 200 bucks each, and people would purchase them to keep the inside of their CPUs clean. What do you think?