MikroTik’s $139 KNOT HL9 puts Wi-Fi HaLow outside, with three ways back to the server
Pick the sensor-side radio before choosing a gateway. The matching enclosure does not make HaLow and LoRa interchangeable.

An outdoor sensor gateway has two different conversations to hold: one with the devices nearby, another with the server that needs their readings. MikroTik’s KNOT Gateway HL9 puts 915MHz Wi-Fi HaLow and Bluetooth on the device side, then offers Ethernet, 2.4GHz Wi-Fi or LTE Cat 1 bis for the trip back.
That separation makes the product more interesting than a pile of radio names. You can choose a location for reaching the sensors without assuming an Ethernet cable already ends there. Cellular backhaul is one option, rather than a requirement to use it for every installation. Each route still needs its own available network and configuration.
MikroTik lists the HL9 at $139 with an IP66 enclosure and passive cooling. It describes BLE advertisement filtering and RouterOS scripts that can decide what happens next. Data can be published through MQTT or HTTP. The box supplies a place to connect the devices and handle their readings; it does not supply a finished dashboard for every project.
Here is the protocol decision beside the older KNOT and two current alternatives. Each column comes from the linked maker’s page. The LoRa options serve a different device ecosystem, rather than being interchangeable HaLow replacements.
| Decision | KNOT Gateway HL9 | Older KNOT | KNOT Gateway LR8 | Milesight UG65 |
|---|---|---|---|---|
| Sensor-side emphasis | 915MHz Wi-Fi HaLow, BLE 5.1 | Bluetooth, wired Modbus bridging | 868MHz LoRa, BLE 5.1 | LoRaWAN |
| Cellular description | LTE Cat 1 bis | Narrowband / CAT-M | LTE Cat 1 bis | Cellular backhaul offered |
| Enclosure information | IP66 | Maker presents an indoor gateway | IP66 | IP65, presented as indoor gateway |
The older KNOT describes bridging wired Modbus sensors and forwarding Bluetooth packets. The LR8 page explains the corresponding LoRa choice. Milesight’s UG65 page describes its LoRaWAN role and backhaul options. Those are useful differences to establish before comparing prices or ordering antennas.
The HL9 and LR8 may look like close siblings because they are. MikroTik’s decisive instruction is “Need LoRa instead?” The answer points to the other model, rather than a setting that turns one radio protocol into the other. Check what your actual sensors speak, including their regional frequency requirements, before choosing either box.
Power also has separate entries worth reading. MikroTik gives the HL9 a 12–57V DC terminal-input range, while PoE input is listed at 18–57V. Treat those as the specifications for their respective inputs. A shared upper limit doesn’t make every supported lower voltage valid at every connector.
An IP rating describes enclosure protection; it doesn’t certify an entire installation. Cable entries, mounting, power and the intended operating conditions still belong in the setup plan. The manufacturer provides the installation instructions, and those should govern the actual placement.
For someone with compatible HaLow devices, the combination is a compact way to collect nearby readings and choose how they get home. For someone with LoRaWAN sensors, the important discovery may simply be that this isn’t the radio model to order. Confirm the exact KNOT Gateway HL9 name if shopping through another seller.
Match the radio before mounting the box.